home *** CD-ROM | disk | FTP | other *** search
- Path: news.io.org!usenet
- From: kcozens@io.org (Kevin Cozens)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: 1084 Pinouts?
- Date: Tue, 20 Feb 1996 00:06:44 GMT
- Organization: Internex Online (io.org), Toronto, Ontario, Canada
- Message-ID: <4gb3av$q7s@ionews.io.org>
- References: <STENZ.96Feb2005137@i12s1.ira.uka.de>
- NNTP-Posting-Host: dyna-175.net7b.io.org
- X-Newsreader: Forte Free Agent 1.0.82
-
- stenz@ira.uka.de (Gernot Stenz) wrote:
-
- >Hello, world!
-
- >I have an old 1084 Monitor running on my Amiga and, errrr, I would
- >like to connect that monitor to an, umm, Atari 600XL I recently got.
- >This Atari box has an outlet on its rear labelled RBG Monitor. Does
- >anybody know if it is possible to hook up the 1084 to the Atari (The
- >600XL is from the not so good old days of non-standard interfaces),
- >and if it is, what are the pinouts of the 1084 and what pins do I have
- >to connect to get it working? I would dearly appreciate your help.
-
- >TIA Gernot
-
- I still have a 1084 on my Amiga 2000. Here is the pinout information
- from the Commodore manual.
-
- Looking at the connector, the pins are numbered:
- 1 2 3 4 5
- 6 7 8 9
-
-
- Pin No. TTL Mode RGB Analog Mode
- 1 Ground Ground
- 2 Ground Ground
- 3 Red Red
- 4 Green Green
- 5 Blue Blue
- 6 Intensity N/C
- 7 N/C Composite Sync
- 8 H Sync N/C
- 9 V Sync N/C
-
- I have no information on the Atari. I hope the above information
- helps.
-
-
- Cheers!
-
- Kevin. (http://www.io.org/~kcozens/)
-
- In decreasing likelihood of getting mail through to me:
- Internet: kcozens@io.org
- AMPRnet: ve3syb@bbs.ve3rpi.ampr.org
- Packet: ve3syb@va3bbs.#scon.on.ca.na
-
- #include <disclaimer/favourite>
-
-